Well Pump Installations, Well Pump Repairs, Submersible Well Pump Replacement, Jet Pumps, Pressure Tanks, Water Storage Tanks, Home Water Treatment Systems, Water Well Inspections, and Water Testing 

Mission Service Area:

Mission | Silverdale | Steelhead | Stave Falls | Hayward Lake | Durieu | Hatzic | Miracle Valley |  Dewdney | Nicomen Island | Deroche | Lake Errock | Harrison Mills | Hemlock Valley | Harrison Hot Springs | Agassiz | Ruskin | Whonnock

Mission Well Pump Guide for Water Well Systems

MISSION WELL PUMP Guide: The heart of your water supply

Private water wells are an indispensable water source for many property owners on rural area properties in Mission. However, the well water doesn’t magically appear at your faucet.

The hero behind the scenes is the water well pump, tirelessly ensuring freshwater flows without interruption into your home day after day. But what happens when the water system experiences hiccups, groans under pressure, or refuses to gush forth?

Fear not! We’ve got a lifeline right here – knowledge.

Mission Well Pump Guide is a comprehensive resource for understanding well pump types and components, troubleshooting common well pump problems, and maintaining optimal performance of a water pumping system.

Centrifugal Well Pumps: The Basic Powerhouse

The centrifugal pump is at the foundation of well pump technology. It’s simple design, and effective mechanics make it a water well industry favorite.   

Installing the right centrifugal well pump tailored to your specific needs is crucial. Mission Well Pump & Repairs is the local expert on centrifugal water pumping systems, operating many shallow wells and water storage tank systems in the Mission area.

How Do Centrifugal Pumps Work?

  • The Impeller: The centrifugal well pump’s core component is its impeller, a rotating disc often made from bronze, stainless steel, or other durable materials. As water enters the impeller’s center or ‘eye,’ centrifugal force drives the water outward.
  • The Diffuser or Volute: This component collects the water that the impeller expels. A high-velocity water flow is converted into high-pressure water and directed into your home’s plumbing or water storage tank.


Factors That Influence Centrifugal Pumps:

Centrifugal pumps’ efficiency depends on the impeller’s diameter, the number of impellers, the size of the inlet opening, and the shaft rotation speed. To pump more water from your Mission water well or to generate higher pressure, you need more energy, affecting the motor’s size and power.

It’s crucial to note that centrifugal well pumps are not positive-acting. They pump less water as the water depth increases or if they’re pumping against increased head pressure.

Given that Mission Well Pump & Repair frequently replaces undersized pumps, the message implies that customers must invest upfront in their water pumping system.

Instead of opting for a cheaper or undersized well pump and facing potential replacements or pump repair much sooner than expected, investing in a high-quality, appropriately sized pump from the beginning is better and will save more money over time.

Repairing a Mission Well Pump and Irrigation System on Local Farm

Jet Well Pumps: Perfect for Different Depths

Jet pumps are another centrifugal variant with a specialized mechanism to pull water from different depths.

The Types of Jet Pumps:

Shallow Well Jet Pump: Mission property owners use shallow well jet pump systems. They are especially popular for water wells less than 25 feet deep or to pump water from a water storage tank.

Deep Well Jet Pump: Typically, deep well jet pumps can lift water from depths up to about 100 to 120 feet, although some manufacturers claim they can handle depths close to 150 feet.

Deep well jet pumps feature an ejector package, or “jet kit,” placed deep in the well. Its two-pipe system ensures constant water circulation, facilitating efficient water pull from a greater depth.

It’s essential to note that the deeper the well, the more powerful the pump needs to be to provide adequate water pressure at the surface.

Mission Well Pump recommends installing submersible pumps for wells deeper than 120 feet. Submersible pumps can handle depths of several hundred feet as they are submerged directly in the well and push water to the surface rather than pulling it as jet pumps do.

When choosing the best pump for a deep well, it’s crucial to consider both the depth of the well and the pump’s capacity to ensure the system meets your water supply needs.

Consult with Mission Well Pump & Repair

We are your local water pumping system experts in Mission. Our service area covers Mission, Silverdale, Steelhead, Stave Falls, Hayward Lake, Durieu, Hatzic, Miracle Valley, Dewdney, Nicomen Island, Deroche, Lake Errock, Harrison Mills, Hemlock Valley, Harrison Hot Springs, Agassiz, Ruskin, and Whonnock.

Convertible Jet Pump: A convertible jet pump is a dual-purpose water pump adaptable for shallow or deep wells. In shallow wells, its jet assembly is attached directly to the pump. In contrast, for deeper wells, the jet assembly is inside the well, utilizing a two-pipe system for water extraction.

The operation of a convertible jet pump hinges on the venturi effect to amplify its suction capabilities. Though adaptable and cost-effective, it may be less efficient than submersible pumps in very deep wells but can be helpful with dropping water levels during our low water season in Mission.

Call Mission Well Pump & Repair for more information about convertible jet pumps.

Submersible Well Pumps: Most Common Well Pump Installation in Mission

Submersible Well Pumps: The submersible well pump operates completely submerged in water. Mission property owners commonly use submersible pumps to pump water from their drilled wells to the surface.

Centrifugal Mechanism: The centrifugal mechanism refers to how a submersible pump moves water using centrifugal force, pushing water away from the centre of rotation.

How the Submersible Pump Works:

Impeller: At the heart of the submersible pump is an impeller, a wheel with a series of backward-curved blades. Usually, an electric motor drives the impeller’s rapid rotation.

Submersible Well Pump Operation: When the submersible pump is engaged, the impeller starts to spin, creating a flow of water into its centre (called the eye of the impeller).

As the water enters the impeller, the centrifugal force produced by the spinning impeller forces the water outward toward the impeller’s edges.

This action increases the water’s velocity and simultaneously decreases its pressure.

From the edge of the impeller, the high-velocity water flows into a diffuser or a volute chamber, designed to convert the water’s kinetic energy (velocity) into pressure.

The pressurized water exits the pump and flows through the piping system to the surface.

Application in Wells: Submersible well pumps and motors are required to operate fully submerged in water.

Nearly every drilled well in Mission has a submersible well pump installed. Due to their high efficiency, these pumps can pump water easily from depths of several hundred feet.

Staging in Deep Wells: There may need to be more than a single centrifugal stage to bring water to the surface in deep wells. Most submersibles have multiple impellers on a single shaft. As water moves from one impeller to the next, its pressure increases, ensuring efficient water delivery from deep wells.

Advantages of Submersible Well Pumps

Efficiency: Submerging the pump eliminates the need for priming and maintains a constant primed state.
Quiet Operation: Being underwater dampens the noise, making them quieter than above-ground pumps. In addition, with the pumps submerged in water, there is no risk of freezing.
Deep Water Lifting: The multi-stage design enables them to lift water from significant depths, making them ideal for wells deeper than 80′

Submersible Well Pump Limitations

Corrosion and Wear: Prolonged exposure to water can cause corrosion, especially if the water contains minerals or other contaminants.
Limited Handling of Solids: Many submersible pumps cannot handle solids, which can lead to blockages. The small tolerances between impellers and diffusers make submersible pumps unsuitable for pumping water containing sand or other abrasives.
Thermal Overload: If the water level drops below the pump, causing insufficient water for cooling, the well pump motor might overheat. Mission Well Pump & Repair often recommends installing pump protection if low water is a concern; it will save your pump!
Shorter Lifespan: Because the pumps are submerged in water, installing a quality submersible pump is crucial to ensuring a longer lifespan for the equipment.
Cable Damage: The electrical cables can get damaged due to wear or external conditions, leading to pump failure.
Costly Pump Repairs: Repairing a submersible pump might be more complicated and expensive than that of surface pumps due to the challenge of retrieving it. A professional submersible well pump installation should always include equipment and labor warranties.
Limited Depth: There’s a maximum depth to which a submersible pump can operate effectively. Going beyond this limit affects the pump’s performance and lifespan.
Difficult Well Pump Inspection: Routine pump inspections are more challenging than surface pumps since the pump is submerged.
Contamination Risk: In the event of any seal failures, there’s a risk of contaminants leaking into the water.
Noise: Submersible pumps are generally quiet due to being submerged, but they can still generate noise, which might be an issue in certain applications or settings.
Size and Weight: Submersible well pumps can be heavy, sometimes making installation or well pump replacement difficult without the right equipment. 

New Drilled Water Well Pump Cost:

Need a well pump installed in your new drilled water well? Call Mission Well Pump & Repair directly, or, if you prefer, you can request a detailed well pump cost estimate online.

Mission Well Pump & Repair specializes in many types of water pumping systems. We’re here to assist you every step of the way!

Variable Frequency Drive: For Unwavering Water Pressure

A constant-pressure system for water wells is like a smart system for your pump. Think of it as a “cruise control” for your water pressure. Just like how cruise control in cars keeps your speed steady, a constant system keeps your water pressure stable.

So, imagine one moment you’re watering your garden and the next, you’re filling up a bathtub. No matter the job, the water pressure remains the same with a constant pressure system.

In simple terms, a constant pressure system is like a helper for your water well, ensuring you get steady water whenever you need it and making life a bit easier for your well pump, ensuring it doesn’t work too hard and lasts longer.

Constant Pressure Technologies:

Variable Frequency Drives (VFD): By electronically adjusting the well pump’s speed, VFDs ensure consistent water pressure across varying flow rates. Not only do VFDs promise steadier pressure, but they also offer potential electrical savings and a significant reduction in water hammer effects.

Pressure Control Valves (PCV): Installed between the well pump and the pressure tank, PCVs automatically adjust to maintain a steady pressure. They’re perfect for standard submersible well pumps that don’t have variable-speed motors (VFDs).

Conclusion: Making the Right Water Well Pump Choice is Important

Every home’s water needs are unique, as is the geography of each location. Understanding the nuances of each well pump and its capabilities ensures you choose the most efficient and sustainable solution for your water supply needs.

Investing in the best well pump for your water needs in your rural area Mission Property secures your water supply and promises long-term savings and peace of mind.

So, the next time you enjoy a refreshing glass of water or a rejuvenating shower, remember the silent hero below ground: Your Well Pump!

Save Money on Well Pump Repairs and INstallations

Mission Well Pump & Rural Properties

Owning rural land in Mission brings the common challenges of owning a rural property, including water well problems and well pump repairs. Do you need to get acquainted with your well pump? We’ve got you covered!

Here’s an overview of the water well pump replacement process and how Mission Well Pump & Repair can assist in making it cost-effective.

When Should a Well Pump be Replaced?

Factors that dictate the lifespan of a submersible well pump:

  1. Quality of the Well Pump: Investing in high-quality water pumps made from durable materials is important as they tend to last longer than cheaper and lower-quality alternatives.
  2. Frequency of Use: A pump used continuously will wear out more quickly than one that operates intermittently.
  3. Short Cycling of Well Pumps: Water well pump Short cycling will reduce a water pump’s lifespan, and most people need help understanding what short cycling is. Short cycling is when a well pump turns on and off too frequently and rapidly. It can cause pump failure and damage the rest of your water pumping system.
  4. Water Quality: Water that contains a lot of sediment, minerals, or other particulates can wear out a pump faster. Corrosive water can also reduce the well pump’s lifespan.
  5. Proper Pump Sizing of Well Pump: If the pump is too small or too large for the well’s needs, it can wear out faster. Mission Well Pump & Repair focuses on properly sized pumps. The system will work more efficiently, and pumps tend to last longer.
  6. Maintenance and Care: Regular and prompt well pump repairs can extend the system’s life. Call Mission Well Pump & Repair for an annual water system inspection and maintenance.
  7. Installation: Proper installation is crucial. Submersible well pumps not correctly installed can cause premature failures.
  8. Electrical Issues: Voltage fluctuations or imbalances can damage the pump’s motor over time.

Generally, the average submersible well pump lasts 8 to 15 years with proper care and under typical conditions. However, this can vary based on the above factors.

Well Pump Replacement Cost in Mission

For many rural property owners in Mission, the potential well pump repair or replacement costs can be a concern. The upside? Mission Well Pumps & Repair offers a few strategies that may help reduce these costs.

If you suspect your well pump is not functioning properly, it is important to educate yourself. To get an estimate for the cost of replacing your well pump, begin by gathering some information:

  • Pump History: When did you first notice the well pump problem?
  • Interventions: Have you tried any solutions to remedy it?
  • Recent Developments: Did you experience any power disruptions or drastic changes in water consumption just before the issue occurred?

Providing Mission Well Pump & Repair with details about the pump issue you are experiencing helps us diagnose the problem quicker and more efficiently, and we can determine the cost to repair or replace your well pump.

Pump costs and repairs will always depend on the problem and what will be required to fix it. The following information will be very helpful if you can provide it when requesting an online quote from Fraser Valley Well Pump & Repair.

The Importance of Water Well Documentation 

Besides addressing the immediate concern, a vital cost-saving measure is thorough documentation of your water well and pumping system.

Here’s a reference list of information you should retain:

Value of Record-Keeping and Well Pumps 

Beyond the immediate problem with your well pump, you can take another crucial step to help reduce costs: meticulous record-keeping.

Here’s a checklist of details you should always have on file:

  • Pump Model: Knowing the specific model can streamline the well pump replacement process.
  • Pump Depth: This helps us determine the best equipment required. The old well pump is often installed near the bottom of the water well, but that is only sometimes the case.
  • Pump Pipe Details: Record the size and type of water pipe connected to your well pump.
  • Pump Wire Size: The wire size determines how efficiently and safely electricity is delivered from the power source to the pump. Using the incorrect wire size can lead to several problems.
  • Water Depth: The static water level (SWL) helps gauge the pump’s workload.
  • Well Casing Details: Keep track of its type and diameter. This information should be on your log.
  • Well Log: Mission Well Pump & Repair will request your well log when installing a new pump or replacing the old pump in your well. If you do not have your water well log, also called a drilling report, you can try to locate it online—Locate a Drilling Report for Water Wells in Mission, BC.

Choosing a Well Pump Repair or Service Company in Mission

Preparation is vital, as is choosing the right well pump repair or service in Mission.

  • Experience in Replacements: Mission Well Pump & Repair has a great team of experienced well pump technicians and installers.
  • Transparent Pricing: We give clear, well-defined pump cost estimates for repairs and replacements.
  • Comprehensive Water Well Solutions: Beyond just well pump repairs, replacements, and installations, we offer a broad scope of water well services in Mission, from submersible pump installations, well pump repairs, pressure switch adjustment, shallow well jet pumps, irrigation pumps, sump pumps, water storage tanks, water well evaluations and inspections, water testing, and home water treatment systems in Mission.
  • Call Us Round-the-Clock: We recognize the importance of uninterrupted, clean water access. Mission Well Pump & Repair provides a 24-hour emergency line.
  • Endorsements: Our reputation depends on the feedback of local clients and word-of-mouth referrals. We value the trust that our customers have placed in us and take great pride in the positive reviews we receive.

FAQ: MISSION Well Pump, Repairs, and Installations

There are plenty of shallow wells in the rural areas of Mission. A shallow-well pump, often called a jet pump, is suitable for relatively shallow wells, usually up to about 25 feet deep.

Here is a breakdown of how suitable a jet pump can be

  1. Depth of Well: A shallow well pump’s most common depth range is 0 to 25 feet. The pump uses atmospheric pressure to push water into the pump instead of relying on suction, and this method is efficient up to about 25′.
  2. Suction Lift: Even though these pumps are said to be suitable for up to 25 feet, their efficiency decreases as you get closer to this limit. Most shallow-well pumps will perform best in wells less than 20 feet deep.


  3. Types of Jet Pumps: There are various shallow well pump types, including single drop jet pumps (for depths up to 25 feet) and double drop jet pumps (for slightly deeper wells, but typically less than 30 feet).
  4. Other Shallow Well Pump Considerations:
  • Water Table Fluctuation: If the water table in your area fluctuates, consider the lowest level it might reach. If it drops below 25 feet, a shallow well pump may not be suitable.
  • Volume: Ensure the pump’s flow rate (usually measured in gallons per minute, or GPM) is sufficient for your household needs.
  • Pressure: If maintaining a steady water pressure is important, install a pressure tank and a jet pump.
  • Jet Pump Construction: Opt for a pump made of durable materials, such as stainless steel or cast iron, to ensure longevity.

If your well depth exceeds 25 feet, or if you’re close to that depth and concerned about efficiency, it’s a good idea to consider a deep well pump or a submersible pump instead. These submersible pumps can pump water from hundreds of feet below ground and handle much greater depths.

1.Assign Gallons Per Minute (GPM) to Each Fixture:

Faucet: 1-2.5 GPM
Toilet: 3-5 GPM for short flush durations
Shower: 2-5 GPM (depending on the type of showerhead)
Washing Machine: 3-5 GPM
Dishwasher: 2-4 GPM
Hose Bib (outdoor faucet): 3-10 GPM (depending on hose diameter and length)

Remember, these are just average values. It’s always better to check the manufacturer’s specifications for precise GPM ratings.

2. Determine Simultaneous Water Demand:

Figure out the highest possible simultaneous water usage. For a home, this might be during the morning or evening when multiple people could be using water simultaneously. For example, two showers might be in use along with a washing machine.

3. Calculate Total Peak Demand:

Multiply the GPM of each fixture by the number that you believe will be used simultaneously.

Sum up these numbers.

For example, if you have:
Two showers at 5 GPM each = 10 GPM
One washing machine at 4 GPM = 4 GPM
Your total peak demand would be 14 GPM.

4. Add a Safety Factor:

Adding a safety factor (10-25%) to your estimated peak demand can account for any inaccuracies or unexpected future water requirement increases.

5. Consider Static and Dynamic Pressure:

While this is a quick guide to sizing based on demand, it’s also essential to consider the well’s depth, elevation changes, and other factors that affect pump sizing. The static level (resting water level) and dynamic level (water level when the pump is working) can influence the pump’s power needs.

6. Select a Well Pump:

Once you’ve determined the peak water demand, choose a pump that can meet or exceed this demand. It’s always better to have a pump that can provide more than the exact peak demand rather than one that might fall short.

7. Regularly Review and Adjust:

As families grow, homes get expanded, or fixtures get added/changed, the water demand can increase. Reviewing and adjusting your pump size or settings every few years or after significant changes to your home is a good idea.

Lastly, consult with Mission Well Pump & Repair, especially when dealing with specifics related to available water supply, well depths, geology, and pump technology. Ensuring the right pump size and type for your situation is very important.

Mission Well Pump & Repair provides online estimates for well pump repairs and replacement costs.

Water quality is a top priority for private well owners in Mission, especially for rural property owners sourcing water from private wells. Unlike municipal water systems, which are regularly monitored and treated to meet strict safety standards, private wells are the property owner’s responsibility.

Regular well water quality testing in Mission is essential for safeguarding public health.

Contact Mission Well Pump Services to obtain the required bottles for water testing kits.


Our Local Service Area

Mission | Silverdale | Steelhead | Stave Falls | Hayward Lake | Durieu | Hatzic | Miracle Valley |  Dewdney | Nicomen Island | Deroche | Lake Errock | Harrison Mills | Hemlock Valley | Harrison Hot Springs | Agassiz | Ruskin | Whonnock


Our Local Services

Well Pump Repairs

Pressure Tank Replacement

Shallow Well Jet Pumps

Irrigation Pumps

Sump Pumps

Pressure Tank Installation

Water Storage Tanks

Water Well Inspection

Water Quality Testing

Home Water Treatment


Our Mission Service Area:

Mission | Silverdale | Steelhead | Stave Falls | Hayward Lake | Durieu | Hatzic | Miracle Valley |  Dewdney | Nicomen Island | Deroche | Lake Errock | Harrison Mills | Hemlock Valley | Harrison Hot Springs | Agassiz | Ruskin | Whonnock