Well Pump Installations, Well Pump Repairs, Submersible Well Pump Replacement, Jet Pumps, Pressure Tanks, Water Storage Tanks, Home Water Treatment Systems, Water Well Inspections, and Water Testing 

Whonnock Well Pump Service Area:

Maple Ridge | Albion | Iron Mountain | Kanaka Creek | Port Hammond | Pitt Meadows | Ruskin | Rolley Lake | Hayward Lake | Silver Valley | Webster Corners

Whonnock Well Pump Repairs Water Pumping Systems

Whonnock Well Pump & Repair Guide

Whonnock Well Pump provides quick water well pump repairs if your pump suddenly stops working. Most people search Google for “well pump service near me” in Whonnock, often not understanding the nature of their well pump problem.

Grasping the mechanics of well pump systems enhances your understanding of your water well system and the necessary repairs they will need over time.

We specialize in submersible pumps for water wells, constant pressure systems, shallow well pumps, jet pumps, pressure switch adjustment or replacement, sump pump installation, irrigation pumps, water well pressure tanks, water storage tanks, water purification systems, and home water filtration treatment.

whonnock Well Pump Repair Service: Our local Area

Maple Ridge, Albion, Iron Mountain, Kanaka Creek, Port Hammond, Pitt Meadows, Ruskin, Rolley Lake, Hayward Lake, Silver Valley, and Webster Corners

Please request a FREE online estimate for a new water well pump, well pump repairs, new water system installations, or general water well services for residential, commercial, and agricultural requirements. 

Call Whonnock Well Pump & Repair for a quick response and all well pump emergencies at 778-860-4220

Whonnock Well Pump builds local water well systems and loca water treatment projects

How to Reduce the Cost of Well Pump Repairs

Whonnock Well Pump & Repair is just a phone call away, and we service water systems throughout the area. But you can do plenty to reduce the cost of well pump repairs on your rural property, which requires a mix of proactive maintenance and informed decisions. Learning basic troubleshooting for well pump systems can save time and money by helping you independently identify and fix simple problems. Whonnock Well Pump provides a step-by-step guide to get you started on basic well pump and water system troubleshooting: Water Well Systems Educational Resources:
  • Well Pumps and Equipment Manuals: Start with the user manual for your pump, which should have a troubleshooting section.
  • Online Tutorials: Look for online water well communities and forums that explain common problems and solutions.
  • Learn the Basics: Understand the basic components of your water pumping system and how they work together.
  • Know Common Water System Issues: Familiarize yourself with common issues like loss of water pressure, pump cycling, or strange noises.

Guide for Water Well Owners in Whonnock

When you experience a sudden loss of water, it can be a frustrating and confusing situation. That’s why we’re here to help. Our office receives many calls from concerned individuals like you, seeking answers and solutions regarding their water systems. Let us help you, too. Callers with limited water system experience often seek help as new property owners in Whonnock.

It’s crucial to get acquainted with your private water system. It is important to know the system to ensure its proper functioning and maintenance.

If you suddenly have no water or have a well pump problem and need help locating your well log, call Whonnock Well Pump & Repair, and we will do our best to help find your water well reports and other information.

What Type of Water Well Do You Have?

Private water wells on rural properties in Whonnock are typically constructed to provide a steady source of potable water.

Several types of wells are suited to different conditions, depths, and water table characteristics.

Here are the most common types of water wells you might find on rural properties in the Whonnock area:

         Dug Wells:

  • Dug or shallow wells are the oldest types of water wells.
  • Dug wells are created by digging a hole in the ground, usually with a shovel or backhoe, until reaching the water table.
  • To prevent collapse, dug wells may be lined with stones, bricks, tiles, or other commonly used concrete rings in the Whonnock area.
  • They tend to be shallow and have a higher risk of going dry and contamination because they are not well protected from surface runoff.

        Driven Wells:

  • Driving a small-diameter pipe into the soft earth, such as sand or gravel, creates driven wells or standpoint wells.
  • They are relatively inexpensive and less prone to contamination than dug wells because they can be sealed.
  • However, they can only be driven through loose material and cannot penetrate rock.

    Drilled Wells:

  • Percussion or rotary drilling machines can drill water wells, extending hundreds or even thousands of feet below the surface.
  • These wells can access deep water sources and are less likely to be contaminated because the drilling process allows the well to be cased and sealed.
  • Drilled wells include variations, including artesian wells, where water naturally rises to the surface under pressure or confined aquifer wells.

    Bored Wells:

  • These are like dug wells but are created using a boring machine.
  • They are typically wider than drilled wells and can store more water.
  • Bored wells can be susceptible to contamination if they are not properly sealed.

    Jetted Wells:

  • These wells use high-pressure water jets to loosen the soil and sediment to create a well hole.
  • They are somewhat limited by their depth and the type of sediment they can penetrate.

    Hand-Pumped Wells:

  • These methods may use the above techniques for the actual borehole but are characterized by a hand pump.
  • They are often found in areas without electricity or where a simpler water extraction method is preferred.

Factors to Consider When Choosing the Best Water Well Type for Your Property:

Geology: The soil and rock type can determine the best well to use.

Depth to Groundwater: Shallow water tables might use a dug or driven well, while deeper groundwater would require a drilled well.Water Quality: The risk of contamination from surface runoff or nearby septic systems may influence the choice.

Local Regulations: Building codes and environmental regulations may limit the type of well construction.

Budget: Water well costs vary significantly between well types, with drilled wells generally being the most expensive due to the machinery and depth they can reach.

All wells must be constructed by licensed water well drillers in the Province of British Columbia, following all provincial guidelines and regulations. 

No Well Log—Now What?

It is crucial to keep your well log in an easily accessible place if you have a drilled well. If you do not have a drilling report, you can visit the Ministry of Environment website and search for it.

In many cases, drilling reports for water wells can be found on the British Columbia Groundwater Wells and Aquifers website, regardless of the drilling date.

You Don't Have a Drilled Well

That’s certainly possible if you own rural property in Whonnock with a private water source. You likely have a shallow well; typically, there’s no report, and there are LOTS of shallow dug wells in Whonnock.

Shallow wells are mostly machine-dug and often years old, with little information available. Most shallow wells are less than 20 feet deep, some only 6 feet. An external jet pump system is typical in Whonnock for drawing water from shallow wells.

Water Well System Inspections

Check for Obvious Issues: Look for loose connections, damaged wires, or any signs of wear and tear.

Electrical Safety:

Turn Off Power: Always turn off the power to the well pump before inspecting or working on electrical components to ensure safety.
Use a Multimeter: Learn how to use a multimeter to check for electrical continuity and voltage.

Testing Water System Components:

Pressure Switch: Test the pressure switch for proper operation. A simple pressure switch adjustment may not only increase low water pressure but also increase the running time of the well pump, reducing short cycling.
Check Valves and Pipes: Inspect valves and pipes for leaks or blockages. It’s common for a buried water line to break or split.

Water Pressure:

Check Pressure Gauge: Monitor the gauge to ensure it’s within the normal range.
Adjust Pressure Switch: If necessary, learn how to adjust the pressure switch to correct water pressure issues.

Cleaning and Maintenance:

Clean Water System Components: Clean components like the pressure switch and tank to ensure they function properly.
Replace Water Filters: Regularly replace filters to maintain water quality and flow. If your system operates with cartridge filters, there should be a maximum differential of 20 lbs.

Keep Water Well System Records:

Document Issues: Log any water system problems, repairs, and maintenance performed on your well pump system. Hold on to all receipts if you have any work done on the system.

If you sell your Whonnock property, please pass this information on to the new owner, and it can be helpful if ever needed.

Whonnock Water Well Experts

  • When in Doubt, Call Whonnock Well Pump and Repair:
    If you need clarification on a particular issue or well pump repair, please give us a call.

Attend Workshops:

  • Local Water Well Workshops: Look for workshops or classes in the Fraser Valley that provide hands-on training for the basic well pump and water well troubleshooting and repair.

Practice Safety:

  • Wear Safety Gear: Always wear appropriate safety gear like gloves and eye protection when working on your water well pump system.

Regular Monitoring:

  • Regular Checks: Perform frequent checks to monitor the system’s performance, which can help you catch issues with your water system before they escalate. Learn basic troubleshooting steps to maintain your water pumping system and avoid common issues and pump repair costs.

Well Pump Repair Cost Estimates

Whonnock Well Pump & Repair offers online estimates for well pump costs, installations, and emergency pump repairs.

Early detection of water well problems can prevent costly well pump repairs and service calls, especially if you need to realize your Whonnock water well is running dry, causing a pump to overheat and eventually burn out.

What Could Trigger a Water Well Pump Problem?

  • Electrical Glitches
  • Required Pressure Switch Adjustment 
  • Low Water Levels 
  • Obstructed or Damaged Components
  • Worn or Faulty Well Pump Parts
  • Incorrect Sizing or Installation of Well Pump
  • Waterlogged Pressure Tanks
  • System Leaks
  • Inadequate Power Supply
  • Frozen or Obstructed Water Lines
  • Corrosion or Rust

Are you experiencing a sudden increase in your electricity bill, air bursts in your water, a reduction or loss of water pressure, unusual noises or clicking sounds from your water system, or a change in the appearance or the odour of your water?

Whonnock Well Pump for Repairs

Contact our office for reliable well pump services in Whonnock, Maple Ridge, Albion, Iron Mountain, Kanaka Creek, Port Hammond, Ruskin, Rolley Lake, Hayward Lake, Silver Valley, and Webster Corners.

Our skilled water system technicians at Whonnock Well Pump & Repair are ready to address and resolve your water system concerns, ensuring it operates efficiently and effectively. Choose Whonnock Well Pump for prompt and professional water well service

Whonnock Well Pump Repair & Maintenance

It’s common for rural property owners in Whonnock to face issues with their well pumps from time to time. Water pumping systems ensure a steady water supply, making well pump repair and replacement vital.

Over time, water well pumps may require repairs or even replacements to continue functioning properly, and neglecting a malfunctioning pump can cause significant disruptions to a water supply.


Water wells have been a vital source of fresh water for rural properties in Whonnock. Modern water wells have pumps that extract and deliver water to our homes, ensuring a steady supply for everyday use.

As with any mechanical system, water pumping systems are prone to malfunctions that may require unexpected well-pump repairs.


The lifespan of a water well pump depends on its type, quality of installation, operating conditions, water quality, and maintenance.

Submersible Pumps: Submersible pumps function entirely underwater without risk of damage or failure. Proper installation of submersible well pumps, engineered for well depths of hundreds of feet, is critical.


The lifespan of a Submersible Pump: is typically between 7 and 15 years. Sometimes, a quality well pump may last up to 25 years if it is well-maintained and operates under ideal conditions.

Factors that can shorten the lifespan of submersible well pumps include frequent pump cycling (turning on and off). If a water well pump runs while the well is dry or operating in high sediment or mineral conditions, that will cause excessive wear and tear on the pump’s components.

The Lifespans as a Jet Pump: A jet pump sits above the ground, drawing water up from the well using suction. The very nature of this suction operation can introduce more wear and tear on the pump, especially when there are air pockets or the water level in the well is low. On the other hand, submersible pumps push water up, which is generally less of a strain on the pump’s components.


  • Water Quality: Wells with high mineral content (like iron or calcium) or sand can cause additional wear on pump parts.
  • Usage: Pumps in homes with high water consumption or using water intermittently, causing the well pump to cycle intermittently, may wear out more quickly and frequently.
  • Maintenance: Regular check-ups, servicing, and promptly addressing minor issues can extend a pump’s life.
  • Installation: Proper installation is critical. Pumps installed incorrectly or without considering factors like the depth of a well, water table fluctuations, and peak demand might not last as long.

Suddenly Have No Water?

Suddenly, you have no water from your water well pump.  You can take many steps to diagnose and effectively resolve the issue with your well pump.

You’ve got this!

  1. Check the Power Supply: Ensure that the electrical circuit to the pump is active. Check your circuit breaker or fuse box to see if the circuit has tripped or a fuse has blown.

  2. Inspect the Pressure Switch and Tank: The pressure switch, usually located near the pressure tank, controls the on/off operation of the pump based on the retention tank’s pre-set pressure.

    Check if the pressure switch is functioning properly. Also, tap the pressure tank to check if it sounds hollow (empty) or thuds (full). A malfunctioning pressure tank can affect the pump’s operation.

  3. Examine the Pump and Pipes: Look for any signs of damage or leaks in the pump and connecting pipes. Damage or leaks can cause a loss of pressure and disrupt water flow.

  4. Check the Water Level in the Well: If the water level in the well has dropped too low, the pump may not be able to draw water. This can be due to a drought or overuse.

  5. Look for Frozen Pipes (in Cold Weather): If you live in an area with freezing temperatures, check if any pipes leading to or from the pump have frozen.

  6. Examine the Pump Controller: Some well systems have a pump controller that can fail and disrupt the operation of the pump.

  7. Listen for Strange Noises: Unusual noises from the pump or the pressure tank can indicate mechanical issues that need professional attention.

  8. Call a Professional: If you’re uncomfortable troubleshooting the system or suspect a more complex issue, it’s advisable to call Whonnock Well Pump & Repair Services. We can diagnose and repair well pump problems that are beyond basic troubleshooting.


Remember, working with water well pumps and electrical systems can be dangerous. If you need help, it’s best to give us a call. Regular maintenance of your Whonnock water well system can prevent unexpected failures.


  • Install a water filter or treatment system if your water has a lot of sediment or minerals.
  • Avoid running the pump when the well is dry.
  • Install a pump protector or monitor to prevent rapid cycling.
  • Schedule regular maintenance and inspections.

While these are general guidelines, always refer to the pump manufacturer’s specifications and recommendations for your pump model and consult with local water well professionals who understand Whonnock’s particular conditions and challenges.


  1. Submersible Pumps: Located deep inside the well, these are waterproof and push water from the well into your home.
  2. Jet Pumps: Installed above-ground in your home or a well house, and draw water up from the well.
  3. Whonnock Rural Property Owners: Install a constant pressure system if drilling a new well. The constant pressure system, known as the SubDrive family, adjusts the water pump’s speed according to demand, maintaining constant pressure and eliminating low pressure.

    These systems include a pressure sensor that monitors the water pressure and sends signals to the controller to regulate the pump speed, keeping the tank pressure constant.

    Unlike traditional systems that cycle on and off at certain psi levels, the constant pressure system operates continuously to provide a steady water flow!

    By varying the pump speed based on water usage, the system is highly efficient, running only as much as necessary to meet demand.


Constant pressure systems pumps use smaller, lighter pressure tanks that can be mounted off the floor, saving space in homes. If you are drilling a new well on your Whonnock property or upgrading an existing water system, contact us or request a water well pump cost in Whonnock.

These water pumping systems are the best and most highly used in Whonnock. However, adding a constant pressure system to a city or municipal water source can stabilize water pressure, regardless of household or yard water demand fluctuations.


There are various reasons a water well pump might not be working, and you might suddenly require a pump repair service, including:

  1. Water Well Pump’s Age and Wear: Pumps have an average lifespan, like any mechanical equipment. Over time, parts can wear out and may require replacement.
  2. Sudden Power Surges: Power surges can damage the electrical components of a pump.
  3. Improper Well Pump Installation: It is essential to install pumps correctly, as issues can crop up sooner than expected.
  4. Low Water Levels: If a well’s water level drops too low, the pump might start to draw air, leading to damage.
  5. Dirty Well Water: Over time, sediment and debris can clog the pump’s components, decreasing efficiency.


  • No water supply: If you turn on the faucet and no water comes out, it could indicate a pump problem.
  • Low water pressure: A decreased water pressure might mean the pump isn’t working properly.
  • Dirty water: If your water is muddy or tastes unusual, the pump might draw water from a shallower depth, collecting sediment.
  • Strange noises: Grinding or humming noises from the pump could indicate a malfunction.
  • High electric bills: A malfunctioning pump might run continuously, driving up electricity consumption.


Delaying well pump repairs can lead to much bigger problems down the road. A malfunctioning pump can increase your utility bills, decrease water quality, or even lead to a complete loss of water supply. When well pump problems are ignored, minor issues can evolve into major complications that might necessitate the replacement of the entire system.


The different well pump types serve a specific water extraction, circulation, or treatment purpose. Here’s a breakdown of the pump’s commonality and usage:

Shallow Well PumpsShallow well jet pumps are for 25–30-foot water wells. Often called suction pumps, they draw water up from the well. Jet pumps are good where the water table is relatively high—Whonnock Well Pump services and repairs shallow well systems throughout the local area.

Deep Well Pumps: Deep well jet pumps are suitable for wells with greater depths and are often used when the water level is too deep for shallow well pumps to operate effectively for groundwater extraction.

Submersible Water Well PumpsMost drilled wells in Whonnock have submersible pumps installed. They are the most commonly used pumps for the local drilled wells on rural properties.

Submersible pumps are efficient at pumping water from significant depths to the surface.

Waste Water and Sewage PumpsSewage pumps handle wastewater that contains human waste and other contaminants and are engineered to pump and transport wastewater from one location to another, such as from a home or building to a treatment facility.

In Whonnock, sewage or septic pumps are essential on rural properties for pumping wastewater from lower-lying areas to higher locations, such as septic tanks or in the many pressurized septic systems.

Jet Pumps: A jet pump sits above the ground, drawing water up from the well using suction. The very nature of this suction operation can introduce more wear and tear on the pump, especially when there are air pockets or the water level in the well is low. On the other hand, submersible pumps push water up, which is generally less of a strain on the pump’s components


Install a sump pump system to protect your Whonnock home from unpredictable water damage challenges.

Did you know that a sump pump can be your home’s best friend, especially during the heavy rains we can get in Whonnock? Sump pumps work hard to keep your basement from flooding and your home dry and secure.

Your sump pump system is your best defense against flooding. With it, you can rest easy knowing your home is protected.

With a sump pump strategically installed to manage excess water, you not only safeguard your property from the costly and distressing effects of water damage but also maintain a healthier home environment by preventing mold and mildew growth.

Invest in peace of mind and protect the integrity of your home with a sump pump—a small step towards a safer, drier, and more comfortable house without the concern of your home flooding, often creating the need for insurance claims!


Assign Gallons Per Minute (GPM) to Each Fixture:

Faucet: 1–2.5 GPM
Toilet: 3–5 GPM for short flush durations
Shower: 2–5 GPM (depending on the type of showerhead)
Washing Machine: 3–5 GPM
Dishwasher: 2–4 GPM
Hose Bib: (outdoor faucet): 3–10 GPM (depending on hose diameter and length)

Remember, these are just average values. It’s always better to check the manufacturer’s specifications for precise GPM ratings.

Determine simultaneous water demand:

Estimate the highest possible simultaneous water usage, such as during peak times when multiple people use water. For example, multiple showers and washing machines may be in use.

Calculate Total Peak Demand:

Multiply the GPM of each fixture by the number that you believe will be used simultaneously.

Add up the numbers.

For example, if you have:
Two showers at 5 GPM each = 10 GPM
One washing machine at 4 GPM = 4 GPM
Your total peak demand would be 14 GPM.

Add a Safety Factor:

Adding a safety factor (10–25%) to your estimated peak demand can account for any inaccuracies or unexpected future water requirement increases.

Consider Static and Dynamic Pressure:

While this is a quick guide to sizing based on demand, it’s also essential to consider the well’s depth, elevation changes, and other factors that affect pump sizing. The static (resting water) and dynamic (water level when the pump works) can influence the pump’s power needs.

Select a Well Pump:

Determining the peak water demand is crucial before selecting a pump. Choosing a pump that can meet or exceed this demand is advisable. It’s always better to have a pump that can provide more than the exact peak demand rather than one that might fall short.

Regularly Review and Adjust:

As families grow, homes get expanded, or fixtures get added/changed, the water demand can increase. Reviewing and adjusting your pump size or settings every few years or after significant changes to your home is a good idea.

Lastly, consult with Whonnock Well Pump & Repair, especially when dealing with specifics related to available water supply, well depths, geology, and pump technology. Ensuring the right pump size and type for your situation is very important.

We provide online estimates for a well pump cost in Whonnock, including installations, well pump repairs, and replacement.

Water quality is a top priority in Whonnock, especially for rural property owners sourcing water from private wells. Unlike municipal water systems, which are regularly monitored and treated to meet strict safety standards, private wells are the property owner’s responsibility.

Regular well water quality testing is essential for safeguarding 

Contact Us to obtain the required bottles for water testing kits for lab samples.


Our Local Service Area

Maple Ridge | Albion | Iron Mountain | Kanaka Creek | Port Hammond | Pitt Meadows | Ruskin | Rolley Lake | Hayward Lake | Silver Valley | Webster Corners


Whonnock Pump Services

Well Pump Repairs

Pressure Tank Replacement

Shallow Well Jet Pumps

Irrigation Pumps

Sump Pumps

Water Storage Tanks

Water Well Inspection

Water Quality Testing

Home Water Treatment

Pressure Tank Installation


Our Whonnock Service Area:

Maple Ridge | Albion | Iron Mountain | Kanaka Creek | Port Hammond | Pitt Meadows | Ruskin | Rolley Lake | Hayward Lake | Silver Valley | Webster Corners